StoneMedic™ MPP Marble Polishing Powder

Directions for Use:

1. Once the area to be restored has been cleaned and adjacent areas protected, wet the surface sparingly and add a small amount of powder to the wet area.
2. Using a red or white nylon pad and buffer (350 rpm or less) move the slurry over the work area (approximately a 100 sq ft [10 sq m] area at a time) several times.
3. When desired polish is achieved, vacuum slurry and immediately rinse with clean water and StoneMedic™ DCC Daily Cleaner Conditioner.
4. Remove rinse solution with vacuum and move to next area to be polished.
5. Once an area has been completed and the adjacent area is ready to be polished, the finished area should be protected by wetting with clean water. Large areas should be completed in a "checkerboard" manner.

Additional Notes:

• Area to be restored should be totally free of any wax coating, topical sealers and dirt.
• Analyze areas adjacent to the work to determine all acid sensitive materials and protect with StoneMedic™ Poly Protect.
• Carpets, wood, polished brass, glass and any other nonmasonry surfaces should be protected.