Syntha-Seal Floor Sealer and Finish

Features & Benefits:

Quick turn around - dries in 30 min or less

Metal interlocked and detergent resistant finish

Uses/Solutions:

Provides protection and gloss to synthetic floor surfaces

Effective Against/On:

Use on any synthetic floor, including multi-purpose rooms and physical therapy sections

Directions for Use:

FOR INDUSTRIAL USE ONLY

Wet floors are slippery. Prevent pedestrian traffic with wet floor signs or barricades.

Preparation:

Strip the floor with an Ecolab stripper at recommended use dilution. Rinse well and dry.

Application:

Apply in even coats. A second and third coat may be applied after the first coat has dried thoroughly. Wait at least 30 minutes between coats.

Maintenance:

Sweep with a wide dust mop treated with Ecolab Huntolene Dust Mop Treatment. For adhering soils, clean by scrubbing with a Neutral Floor Cleanerat1-2 oz per gallon of water. Rinse thoroughly.

Recoating:

One or two additional coats may be added after scrubbing to restore luster.

Removal:

Complete removal is recommended when the appearance of the coating is no longer improved by recoating. Remove as described in "Preparation." VOC - 50 g/L