Oasis® Enforce

Features & Benefits:

Super concentrated formula provides maximum use-cost effectiveness

Liquid formulation is completely soluble and easily dispensed for no waste

Easy rinsing properties help reduce rinse water volumes to lower costs

No mixing or dissolving of foam additives saves time and reduces labor

Rapid soil penetration reduces clean-up time.

Chlorinated formulation ensure superior protein removal

Free rinsing – leaves no film or residue on equipment surfaces

Uses/Solutions:

Daily floor cleaning and degreasing

Effective Against/On:

Soap film, grease, oil and other common soils

Directions for Use:

Foam Cleaning:

1. Dismantle equipment for cleaning and pre-rinse to remove all loose soil
2. Foam all equipment surfaces with Enforce, mixed at 3 to 5 oz per gallon (2.3% to 3.9%) of water. Allow foam to soak 5 to 15 minutes. Do not allow foam to dry
3. Rinse thoroughly with potable water
4. Sanitize prior to start-up

Spray Cleaning:

1. Dismantle equipment for cleaning and pre-rinse to remove all loose soil.
2. Spray equipment with an Enforce solution at a concentration of 1 to 2 oz per gallon (0.8% to 1.6%) of water
3. Rinse thoroughly with potable water
4. Ssanitize prior to start-up

Soak Cleaning:

1. Pre-rinse parts to remove loose soil
2. Soak parts in Enforce solution at a concentration of 2 to 4 oz per gallon (1.6% to 3.1%) of water. Water temperature should be 100 to 120 F
3. Rinse thoroughly with potable water.
4. Reassemble equipment and sanitize prior to stat-up